User manual ZYXEL P2602HW-C QUICK GUIDE

[. . . ] These are FXS (Foreign Exchange Station) ports. 4 POWER: Use the included power adaptor to connect this power socket to an appropriate power source (see the User's Guide for power adaptors by region). After you've made the connections, push in the power button to turn on the Prestige. The PWR/SYS LED blinks during system testing and turns steady green if the testing is successful. [. . . ] Use the VoIP screens to configure SIP account 2. 7 Prestige 2602HW Series Quick Start Guide If you have a SIP account like 1234@VoIPprovider. com, "1234" would be the SIP Number and "VoIP-provider. com" would be the SIP Service Domain. REGISTER Server Address/Port: If you have no registrar server information, copy what you entered in the SIP Server Address/Port fields. Caller ID: If you want to show identification information when you make VoIP calls, select Send Caller ID. 5 Verify your LAN, WAN and SIP settings. To change the LAN settings, click Change LAN Configuration; otherwise click Save Settings to save the configuration and go to the final wizard screen. If you change the Prestige's LAN IP address, you must use the new IP address if you want to access the web configurator again. 6 Click Save Settings in the screen shown in step 4 to go to the final wizard screen. The Prestige automatically tests the connection to the computer(s) connected to the LAN port(s). To test the connection from the Prestige to the ISP, click Start Diagnose. Otherwise click Return to Main Menu to go back to the main screen. 8 Prestige 2602HW Series Quick Start Guide 2. 4 Speed Dial Configuration Click Voice in the navigation panel and then Speed Dial to display the following screen. Speed dial provides shortcuts for dialing frequently used (VoIP) phone numbers. You can use speed dial entries for peer-to-peer calls or SIP numbers that use letters. Enter the SIP number of the party you will call and a name to identify them. Select Use Proxy if calls to this party use your SIP account. Select Non-Proxy (Use IP or URL) if calls to this party use a different SIP server or go directly to the callee's VoIP phone (peer-to-peer). Enter the SIP server's or the party's IP address or domain name. Click Add. 2. 5 Lifeline Configuration (Prestige 2602HWL) With the Lifeline feature, you can use both VoIP and regular phone services. Click Voice in the navigation panel and then Lifeline. PSTN Pre-fix Number: If you want to make a regular call when the PWR/SYS LED is orange, dial the prefix number that you configure here and the phone number. If the PWR/SYS LED is green or off, make regular calls without a prefix number. Relay to PSTN: Enter phone numbers that should use the regular phone service (without the prefix number). The numbers must be for regular phones (not VoIP phones). Click Apply. 9 Prestige 2602HW Series Quick Start Guide 2. 6 Make Calls Through the Internet When the VoIP LED turns on, your SIP account is registered successfully. Dial a numerical SIP number (like "12345" for example) on your phone's keypad. Use speed dial entries for peer-to-peer calls or SIP numbers that use letters. [. . . ] If you've changed the Prestige's password and forgotten it, use the RESET button. Press the button in for about 10 seconds (or until the PWR/SYS LED starts to blink), then release it. It returns the Prestige to the factory defaults (password is 1234, LAN IP address 192. 168. 1. 1 etc. ). Verify the Internet connection settings in the wizard. [. . . ]